RD
Monospindle multiblade trimming machine
The DONATONI RD single-pass trimming machines are designed to make longitudinal cuts on marble tiles and strips and they find many applications in several processing sectors and phases: for trimming jobs after the polishing line; to square up shapeless pieces; to make skirting strips; for mosaics ana stone bases in the decoration stone sector.
Datasheet RD
Multiblade
Semi-Automatic
Monospindle
| TYPE | 30 kW | 55 kW | 75 kW |
|---|---|---|---|
| Useful cutting width | 610 mm | 610 mm | 610 mm |
| Table useful length | 3400 mm | 3400 mm | 3400 mm |
| Maximum blades diameter | MIN 300/MAX400mm | MIN 300/MAX400mm | MIN 300/MAX400mm |
| Cutting thickness | MAX 50 mm (disco 300)/MAX 100 mm (disco 400) | MAX 50 mm (disco 300)/MAX 100 mm (disco 400) | MAX 50 mm (disco 300)/MAX 100 mm (disco 400) |
| Disks spindle motor power | 30 kW | 55 kW | 75 kW |
| Installed power | 32 kW | 57 kW | 77 kW |
| Sled or carrying spindle/motor bridge vertical travel | 100 mm | 100 mm | 100 mm |
| Water consumption | 90 l/min | 90 l/min | 90 l/min |
| Machine weight | 2000 kg circa | 2100 kg circa | 2200 kg circa |
| Overall dimensions | 3400 x 2000 x 2000 h/mm | 3400 x 2100 x 2000 h/mm | 3400 x 2200 x 2000 h/mm |
RD trimming machines:
- they consist of a single diamond-studded blade-bearing spindle;
- they permit rapid replacement both of the shaft complete with all disks, or single disks by opening the top of the structure and thanks to machine special design;
- they are fitted with spacers between disks to calibrate cut dimensions;
- they consist of a single diamond-studded disk-bearing spindle;
- they permit rapid replacement both of the shaft complete with all disks, or single blade thanks to front and top opening of the structure and thanks to spindle special design;
-they are fitted with spacers between blades for the measurements of the cuts to be made;
-the supporting surface are comprised of a high thickness motorised rubber belt, with adjustable feed speed depending on the thickness and the type of workpiece;
-they operate with motor/spindle, with belt transmission, with the possibility of RPM variation based on the material being cut;
-they guarantee perfect longitudinal cutting precision using special conveyor belt side guides;
-the disk spindle motor is positioned where it is protected as much as possible from processing waste and jets of water, guaranteeing safety, durability and reliability;
-they permit the spindle bridge to lift and lower to adjust cutting depth and compensate for diamond disk diameters and wear;
-they are supplied complete with a lateral workpiece guide bar that can be adjusted in width and equipped, in its feed section, with pressers that keep the workpiece adherent to the belt and pressed against the guide bar;
-they offer full control by machine operators of all machine controls (spindle support locking controls, disk depth adjustment, guide bar position) mounted on the front of the machine;
-the strong and sturdy structure can mount motors with up to 75 kW power.
- they consist of a single diamond-studded blade-bearing spindle;
- they permit rapid replacement both of the shaft complete with all disks, or single disks by opening the top of the structure and thanks to machine special design;
- they are fitted with spacers between disks to calibrate cut dimensions;
- they consist of a single diamond-studded disk-bearing spindle;
- they permit rapid replacement both of the shaft complete with all disks, or single blade thanks to front and top opening of the structure and thanks to spindle special design;
-they are fitted with spacers between blades for the measurements of the cuts to be made;
-the supporting surface are comprised of a high thickness motorised rubber belt, with adjustable feed speed depending on the thickness and the type of workpiece;
-they operate with motor/spindle, with belt transmission, with the possibility of RPM variation based on the material being cut;
-they guarantee perfect longitudinal cutting precision using special conveyor belt side guides;
-the disk spindle motor is positioned where it is protected as much as possible from processing waste and jets of water, guaranteeing safety, durability and reliability;
-they permit the spindle bridge to lift and lower to adjust cutting depth and compensate for diamond disk diameters and wear;
-they are supplied complete with a lateral workpiece guide bar that can be adjusted in width and equipped, in its feed section, with pressers that keep the workpiece adherent to the belt and pressed against the guide bar;
-they offer full control by machine operators of all machine controls (spindle support locking controls, disk depth adjustment, guide bar position) mounted on the front of the machine;
-the strong and sturdy structure can mount motors with up to 75 kW power.
Request information
Costruzioni Meccaniche DONATONI s.r.l.
Località Montean, 9
37010 Cavaion Veronese - Verona
info@donatoni.com | sales@donatoni.com
Phone number: +39 0456260275