SKFR-05
Machine for cladding
The main feature of SKFR-05 MACHINE FOR CLADDING is the extreme flexibility in the processing that allows to obtain holes and kerfs, depending on the configuration
required by the customer.
All types of cladding with a single machine.
Kerfs, slot cuts and drilling.
Continuous kerf
Lowered kerf
Slot
Vertical drilling
Horizontal drilling
Drilling with pocket
EVERYTHING YOU CAN DO
| TYPE | SKFR-05 |
|---|---|
| Material width | Da 150 a 1000 mm |
| Material length | Da 200 a 1500 mm |
| Maximum thickness of material | Da 20 a 80 mm |
| Cutting blade diameter | 180 mm Foro/hole diam 22.23 mm |
| Drill bit diameter | Da 6 mm a 12 mm |
| Blade / drill motor power | 1,5 kW / ciascuno |
| Installed power | 10 kW |
| Water consumption | 15 l/min |
| Compressed air consumption | 30 l/min |
| Overall dimensions | 4100x3100x2100/h mm |
| Machine weight | 3 t |
Features of SKFR-05:
- Single load to work all sides;
- Processing of all sides;
- Processing also different in dimensions and distances for a single load;
- Extreme flexibility;
- Configurable with tools based on specific needs;
- Adjustable speeds according to the hardness of the material;
- Table with belts conveyor to load the machine continuously.
- Single load to work all sides;
- Processing of all sides;
- Processing also different in dimensions and distances for a single load;
- Extreme flexibility;
- Configurable with tools based on specific needs;
- Adjustable speeds according to the hardness of the material;
- Table with belts conveyor to load the machine continuously.
Request information
Costruzioni Meccaniche DONATONI s.r.l.
Località Montean, 9
37010 Cavaion Veronese - Verona
info@donatoni.com | sales@donatoni.com
Phone number: +39 0456260275