SC3
Horizontal splitting machine
The DONATONI SC3 splitting machine cuts marble strips and tiles horizontally into two parts.
Datasheet SC3
Multiblade
| TYPE | SC3/6G |
|---|---|
| Useful cutting width | MIN 250 / MAX 630 mm |
| Table useful length | 6000 mm |
| Number spindle units (paired and opposed) | 6 |
| Maximum disk diameter | 2 x 550 / 2 x 700 / 2 x 850 mm |
| Material thickness (input) | MIN 22 / MAX 100 mm |
| Useful thickness (output) | MIN 10 / MAX 40 mm |
| Spindles motor power | 18 kW x 6 gruppi/groups |
| Installed power | 112 kW |
| Water consumption | 100 l/min |
| Machine weight | 6000 kg circa |
| Overall dimensions | 6000 x 2000 x 2100 mm |
The particular characteristics of the SC3 splitting machine are:
-the positioning of the spindle units in the lower part of the cutting surface, giving the operator better accessibility and greater control of the machine with easy and fast tool changing;
-the disk carrier spindles remain fixed and the thickness of the material is changed through the vertical movement of the belt surface, shown on the display, ensuring greater cut alignment accuracy;
-the vertical movement of the belt is motorised and synchronised on 4 columns that make up the structure;
-each spindle unit is independent and the motion between the motor and the spindle is powered by the drive belt;
-it features a hermetically closed structure, which ensures noise reduction and the containment of processing water, in addition to operator safety;
-splitting the cut with several disks requires less spindle power, thus guaranteeing higher cutting speed and higher yield in production;
-it is equipped with a device that automatically slows down the feed rate of the conveyor belt during the cutting process, when any of the cutting units exceeds the safety limit;
-it comes with a vertical presser that can be adjusted with the handwheel, which guarantees the adherence of the material to the belt;
-it is equipped with a motorised lateral material guide, with positioning shown on a display.
-the positioning of the spindle units in the lower part of the cutting surface, giving the operator better accessibility and greater control of the machine with easy and fast tool changing;
-the disk carrier spindles remain fixed and the thickness of the material is changed through the vertical movement of the belt surface, shown on the display, ensuring greater cut alignment accuracy;
-the vertical movement of the belt is motorised and synchronised on 4 columns that make up the structure;
-each spindle unit is independent and the motion between the motor and the spindle is powered by the drive belt;
-it features a hermetically closed structure, which ensures noise reduction and the containment of processing water, in addition to operator safety;
-splitting the cut with several disks requires less spindle power, thus guaranteeing higher cutting speed and higher yield in production;
-it is equipped with a device that automatically slows down the feed rate of the conveyor belt during the cutting process, when any of the cutting units exceeds the safety limit;
-it comes with a vertical presser that can be adjusted with the handwheel, which guarantees the adherence of the material to the belt;
-it is equipped with a motorised lateral material guide, with positioning shown on a display.
Request information
Costruzioni Meccaniche DONATONI s.r.l.
Località Montean, 9
37010 Cavaion Veronese - Verona
info@donatoni.com | sales@donatoni.com
Phone number: +39 0456260275