APL
Automatic cross cutting machine
DONATONI APL cross-cutting machines allow single pass cutting of material with a thickness up to 100 mm (APLX version) and 200 mm (APLB version). APLX version, thanks to DONATONI System X, guarantees to cut both marble, granite, ceramics and quartzite with the same spindle, allowing the operator to vary the diameter of the blade with a simple manual operation.
Single blade
Automatic
VARIOUS DIAMETERS
OPTIMIZATION SOFTWARE
APLX VERSION
APLB VERSION
Single pass continuous cutting
1 spindle and 3 blade diameters installable
| TYPE | APLX/06 - APLX/10* | APLB/06 - APLB/10* |
|---|---|---|
| Useful cutting width | 610 mm - 1000 mm* | 610 mm - 800 mm* |
| Maximum cutting thickness | 100 mm | 150 MM - 200 mm |
| Blade diameter | 300 - 350 - 400 mm | 500 - 625 mm |
| Type of table | A nastro - Belt | A nastro - Belt |
| Blade spindle motor | 7,5 kW - 9,2 kW* | 11 kW - 15 kW* |
| Installed power | 10 kW - 13 kW* | 13,5 kW - 17,5 kW* |
| Water consumption | 20 l/min | 20 l/min |
| Compressed air consumption | 15 l/min | 15 l/min |
| Overall dimensions | 3800x1900x2300/h mm - 3800X2250X2300/h mm* | 3800x2300x2300/h mm - 3800X2850X2300/h mm* |
| Machine weight | 2000 kg - 2600 kg* | 2200 kg - 2800 kg* |
| Cutting pass | Unica - Single pass | Unica - Single pass |
The APL cross cutter:
- works with single-pass cutting for marble of various lengths and thicknesses, guaranteeing precision and high productivity;
- its solid structure supports and handle heavy slabs;
- the supporting surface is comprised of a thick, motorised rubber belt, offering two speeds: a fast one, to approach the required measurement, and a slow one, for precise material positioning;
- it is fitted with pneumatic clamps, to hold down the slab, synchronised with the cutting phases;
- it allows the operator to perform made-to-measure cuts thanks to manuallyadjustable recessed reference marks fitted on the bench;
- it operates with motor/spindle, with belt transmission, with the possibility of rpm variation based on the material being cut;
- it is possible to adjust the disc cutting depth on the belt, taking disc wear into account, thanks to the automatic up/down movement of keyboardadjustable spindle carriage;
- it has an inverter that manages the forward movement of the spindle carriage to adjust the cutting speed;
- in the final phase, the spindle carriage slows down to facilitate the cutting process;
- it includes quick spindle carriage return, reducing processing times;
- the on-board PLC controls the various processing phases, offering the operator a broad choice of processing cycles;
- it features a touch screen for man-machine interfacing, to: set the cutting cycles, control processing progress in real time, check parts operation and quantity of cut material.
Made-to-measure cuts with joystick
The operator brings the material up to the disc for the first cut, and performs cross cutting. The cross cutter allows the operator to perform made-to-measure cuts or cutting at set lengths. The lengths can be set using the alphanumeric keypad or the keys of the simplified “intuitive” system.
Sequential automatic made-to-measure cutting
The operator assigns the lengths to the buttons (max 6) and can also set one of the following sequences: cutting sequence with different measurements; cutting sequence with a single repeatead measurement or several repeated measurements. The cutting sequences can be combined with several widths of the material, and entered in a database that the operator can then use.
- works with single-pass cutting for marble of various lengths and thicknesses, guaranteeing precision and high productivity;
- its solid structure supports and handle heavy slabs;
- the supporting surface is comprised of a thick, motorised rubber belt, offering two speeds: a fast one, to approach the required measurement, and a slow one, for precise material positioning;
- it is fitted with pneumatic clamps, to hold down the slab, synchronised with the cutting phases;
- it allows the operator to perform made-to-measure cuts thanks to manuallyadjustable recessed reference marks fitted on the bench;
- it operates with motor/spindle, with belt transmission, with the possibility of rpm variation based on the material being cut;
- it is possible to adjust the disc cutting depth on the belt, taking disc wear into account, thanks to the automatic up/down movement of keyboardadjustable spindle carriage;
- it has an inverter that manages the forward movement of the spindle carriage to adjust the cutting speed;
- in the final phase, the spindle carriage slows down to facilitate the cutting process;
- it includes quick spindle carriage return, reducing processing times;
- the on-board PLC controls the various processing phases, offering the operator a broad choice of processing cycles;
- it features a touch screen for man-machine interfacing, to: set the cutting cycles, control processing progress in real time, check parts operation and quantity of cut material.
Made-to-measure cuts with joystick
The operator brings the material up to the disc for the first cut, and performs cross cutting. The cross cutter allows the operator to perform made-to-measure cuts or cutting at set lengths. The lengths can be set using the alphanumeric keypad or the keys of the simplified “intuitive” system.
Sequential automatic made-to-measure cutting
The operator assigns the lengths to the buttons (max 6) and can also set one of the following sequences: cutting sequence with different measurements; cutting sequence with a single repeatead measurement or several repeated measurements. The cutting sequences can be combined with several widths of the material, and entered in a database that the operator can then use.
Request information
Costruzioni Meccaniche DONATONI s.r.l.
Località Montean, 9
37010 Cavaion Veronese - Verona
info@donatoni.com | sales@donatoni.com
Phone number: +39 0456260275